Keithley 071313700(June 2013)(Model CA-18-1) free download

File name 071313700(June 2013)(Model CA-18-1).pdf

Model CA-18-1 Keithley Instruments, Inc. 28775 Aurora Road Shielded Cable Terminated with Dual Banana Plugs Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Description The Model CA-18-1 is intended for use with binding post inputs or dual banana jacks. Figure 1: Model CA-18-1 Item shipped may vary from model pictured here. Characteristics Length: 5 ft (1.5 m) Rating: 1400 V, 1 A Nominal impedance: 50 071313700 / June 2013 *P071313700* 1 Safety precautions The following safety precautions should be observed before using this product and any associated instrumentation. Although some instruments and accessories would normally be used with nonhazardous voltages, there are situations where hazardous conditions may be present. This product is intended for use by qualified personnel who recognize shock hazards and are familiar with the safety precautions required to avoid possible injury. Read and follow all installation, operation, and maintenance information carefully before using the product. Refer to the user documentation for complete product specifications. If the product is used in a manner not specified, the protection provided by the product warranty may be impaired. The types of product users are: Responsible body is the individual or group responsible for the use and maintenance of equipment, for ensuring that the equipment is operated within its specifications and operating limits, and for ensuring that operators are adequately trained. Operators use the product for its intended function. They must be trained in electrical safety procedures and proper use of the instrument. They must be protected from electric shock and contact with hazardous live circuits. Maintenance personnel perform routine procedures on the product to keep it operating properly, for example, setting the line voltage or replacing consumable materials. Maintenance procedures are described in the user documentation. The procedures explicitly state if the operator may perform them. Otherwise, they should be performed only by service personnel. Service personnel are trained to work on live circuits, perform safe installations, and repair products. Only properly trained service personnel may perform installation and service procedures. Keithley Instruments products are designed for use with electrical signals that are measurement, control, and data I/O connections, with low transient overvoltages, and must not be directly connected to mains voltage or to voltage sources with high transient overvoltages. Measurement Category II (as referenced in IEC 60664) connections require protection for high transient overvoltages often associated with local AC mains connections. Certain Keithley measuring instruments may be